i tried everything i knew to do and all the advice i got and still couldnt get that damn clutch to work right so for now i am giving up on it i may just try new cable,although thats when the problem started was when i put i new clutch cable on it.it gets worse when its real cold.i just dont know.
hey man i can help ya
well first off what do you have...well anyway..try this...take your clutch cover back off..ok when you do this there is a little rod with teeth on it, this is on the clutch cover...and the is a little clutch rod that is in the center of you clucht plates..make sure that the clucht cable is disconnectedfrom the clutch arm, this is the little rod i was talking about..ok then slide the clutch cover back on making sure that the clutch arm is at about 85 degrees toward the front of whatever you ride...now pull the the arm toward the rear of the bike or quad..making sure that the is no slack...now hook you cable back up to the arm and adjust it to where you like it... now sometime the teeth on the the rods like to wear down making your clutch not work i would check them first...hope this helps if not let me know whats up and i will help you out...
first of all cr500 and if u r
first of all cr500 and if u r talking about clutch arm on opposite side of clutch cover there is no way to move that by hand
what
umm you should be able to move that with your hand...if not then something is mesed up...